BAMOSB Panel · SKU BAMOSB-7700526137553
FOB Ningbo · 21 days to FOB Ningbo
Stocked standard SKUs · Custom cuts available
Eight standard finishes, produced by heat treatment rather than pigment. The bamboo grain stays visible in every one of them.
Lightest tone, closest to the raw strand colour.
Warm mid-tone, the most neutral of the range.
Deeper brown with a warm cast.
Rich dark brown, high-contrast grain.
Near-black with visible strand definition.
Pale, desaturated Scandinavian tone.
Opaque white with the grain readable underneath.
Textured, matte finish with a sandy hand.
The aesthetic comes from the bamboo grain — visible in every finish, and consistent across panels in a way solid timber cannot match. The performance comes from the hot-press process: strands compressed into a dense, dimensionally stable panel and sealed for water resistance.
The result: one panel grade for interior feature walls, ceilings and protected exterior cladding — the same finish range on both sides of the wall.
Fixing is tongue-and-groove click-lock, or face-fastened to battens depending on the substrate.
Measured values are third-party laboratory results. Reference limits quoted for the standards are grade minima, not BAMOSB product values.
BAMOSB bamboo wall cladding is an engineered three-layer bamboo panel with a waterproof surface treatment, supplied in eight factory finishes. It is used as interior wall and ceiling cladding - feature walls, hotel and restaurant interiors - and as protected facade cladding on commercial buildings, face-fastened to battens with a ventilated cavity behind it. It is a cladding board, not a rainscreen: on an exterior wall the cavity, drainage and flashing are designed with the installer.
Yes, as protected facade cladding. The panels are fixed to battens with a ventilated cavity behind them, which is what keeps water out of the panel edge and out of the wall, and water resistance is tested to EN 927-1. If your project needs the panel exposed to driving rain rather than protected by a cavity, tell us before you order - we will say plainly whether the build-up suits it, and we will send the fixing details and the cavity drawing for the batch you buy.
Fire classification is issued per batch on the EN 13501-1 test report, and the class depends on the panel build-up and the surface finish; our standard panel grade is tested to B-s1, d0. That is a material classification, not a system approval: your project may still require the cladding system - panel, cavity, insulation and fixings - to be assessed as an assembly. Tell us the class your local code requires and we will send the matching test report.
Three differences matter to a specifier. Feedstock: Moso bamboo is harvested on a 4-6 year rotation and regrows from the root system, against a 20-30 year cycle for the softwood behind fibre-cement and wood-fibre products. Finishing: the eight factory finishes - Natural, Caramel, Toffee, Chocolate, Smoked Ebony, Limed, Whitewash, Sand - arrive sealed and need no site painting. Handling: at 12 mm the panel is light to install by hand, and it stays dimensionally stable, with measured MOR of at least 30 MPa and MOE of at least 4,500 MPa.
Yes. Beyond the eight standard finishes we supply custom carbonised and toned shades, textured surfaces and CNC-cut patterns on request; custom finishes and textures run 28-35 days instead of 21. Panels are 12 mm as standard, with 8 mm and 15 mm on request, and can be tongue-and-groove click-locked or face-fastened to battens.
One 40' HQ container, about 1,200 m2. Panels are supplied in production batches and different finishes can be consolidated into the same container. Lead time is 21 days from purchase order to FOB Ningbo for the eight standard finishes. A free sample kit with one 300 x 300 mm panel per SKU and all eight finish swatches is dispatched within 3 business days.
Cladding failures are almost always substrate or fixing problems, not panel problems. These are the details to control.
We quote EXW, FOB, CIF, CFR, DAP and DDP; physical shipments are made on FOB Ningbo, CIF or DAP terms.
Values below are the measured, third-party laboratory results for this product. Test basis: MOR and MOE per EN 310, thickness swell and internal bond per EN 317, formaldehyde emission per EN 717-1. Batch-level results ship on every spec sheet. Items marked “target” are development goals under independent re-test, not current product values.
| Grade / standard | EN 13501-1 B-s1, d0 · EN 13501-1 · EN 350 |
|---|---|
| Thickness | 12 × 1,220 × 2,440 mm |
| Standard size | 1,220 × 2,440 mm · Custom cuts available |
| Density | 600 kg/m³ |
| Bending strength (MOR) | ≥ 30 MPa (measured, third-party lab) · Target ≥ 30 MPa (measured) |
| Modulus of elasticity (MOE) | ≥ 4,500 MPa (measured, third-party lab) |
| Thickness swelling, 24 h immersion | ≤ 15% (EN 317) |
| Formaldehyde emission | E0 (measured) · 0 ppm added UF (phenolic resin) |
| Fire classification | B-s1, d0 (EN 13501-1) — highest panel-class rating |
| Minimum order quantity | 1 × 40' HQ (≈ 1,200 m²) |
| Lead time | 21 days to FOB Ningbo |
Source: BAMOSB internal QC plus third-party laboratory testing. Per-lot spec sheets are issued with every shipment.