BAMOSB

BAMOSB Panel · SKU BAMOSB-7700518437073

BAMOSB Outdoor Bamboo Decking (BOSB) — High-Performance Structural Panel

EN 350 Class 1E0 · No UF FSC C162198
Thickness
20 × 140 × 2,440 mm
Panel size
140 × 2,440 mm
Density
1,150 kg/m³
Grade
EN 350 Class 1
MOQ
1 × 40' HQ (≈ 1,200 m²)
Lead time
21 days to FOB Ningbo

FOB Ningbo · 21 days to FOB Ningbo
Stocked standard SKUs · Custom cuts available

Outdoor terrace decked with BAMOSB outdoor bamboo decking
Exterior · EN 350 Class 1 · 20 × 140 mm

Outdoor decking. Harder than oak, cleaner than tropical hardwood.

Thermally modified Moso bamboo, hot-pressed to a dense outdoor board and finished with a UV-resistant oil. EN 350 Class 1 durability, 1,150 kg/m³ density, and no tropical hardwood in the supply chain.

EN 350 Class 1
Highest outdoor durability class
1,150 kg/m³
Density — denser than most tropical hardwoods
110+ MPa
Bending strength (MOR) — measured, third-party laboratory
20mm
Thickness
140 mm
Width
2,440mm
Length
Class 1
EN 350 durability
01 — The product

A decking board that is engineered for the weather.

Why this board

Hot-pressed, dense, outdoor-rated.

Softwood decking weathers by softening and splintering. BAMOSB decking is thermally modified at 200 °C, then hot-pressed into a board at 1,150 kg/m³ — denser than most tropical hardwoods, with the toughness to take foot traffic and the density to hold a fastener.

Compared to tropical hardwood: the same EN 350 Class 1 durability class, at comparable installed cost, without contributing to tropical deforestation or the price volatility that comes with it.

Maintenance: re-oil annually for colour stability. Re-oiling is cosmetic — it does not change structural performance.

Indoor-outdoor continuity with bamboo deck boards
02 — Anatomy of a board

What happens inside the board.

i
Thermal modification
Moso bamboo is heated to 200 °C, which breaks down the hemicellulose in the cell wall. The board becomes dimensionally far more stable and is no longer attractive to termites or decay fungi.
200 °C
ii
Hot pressing
Strands are laid up, glued with phenolic resin and pressed into a dense board. High density is what gives the board its hardness and fastener-holding power.
1,150 kg/m³
iii
Surface finish
Brushed or smooth profile, finished with a UV-resistant oil. Brushed is the variant specified where slip resistance matters.
8 finishes
Phenolic resin · EN 350 Class 1 · FSC C162198 bamboo chain of custody
03 — Performance

The numbers that matter for outdoor use.

110+ MPa
Bending strength (MOR) — measured, third-party laboratory
14,000+ MPa
Modulus of elasticity (MOE) — measured, third-party laboratory
1,150 kg/m³
Density
04 — Technical specifications

The full spec sheet.

Measured values are third-party laboratory results. EN 350 figures quoted for the class are reference values, not BAMOSB product values.

Property
Value
Standard dimensions
20 × 140 × 2,440 mm (3,050 mm length on request)
Density
1,150 kg/m³
Bending strength (MOR)
≥ 110 MPa (measured, third-party lab)
Modulus of elasticity (MOE)
≥ 14,000 MPa (measured, third-party lab)
Thickness swell (24 h)
≤ 15% (EN 317)
Durability class (EN 350)
Class 1 — highest
Use class (EN 350)
Class 3 — above ground
Finish
UV-resistant oil, 8 standard finishes; brushed and smooth profiles
Test basis & status
Outdoor durability per EN 350, bending strength and dimensional stability per EN 1551, formaldehyde emission per EN 717-1. Values marked “measured” are BAMOSB third-party laboratory results. EN 350 Class 1 is a durability class for outdoor use above ground.
Minimum order
One 40' HQ container (≈ 1,200 m² depending on board profile). Mixed widths can be consolidated into a single container.
Lead time
21 days from purchase order to FOB Ningbo for the 8 standard finishes; 28–35 days for custom finishes, textures and CNC patterns.
Packing
Bundled and banded with PE film and edge protection; ≈ 1,200 m² per 40' HQ container depending on board profile.
Documents
Bill of lading, commercial invoice, packing list, certificate of origin, EN 350 durability test report and FSC C162198 chain-of-custody certificate on request.
Samples
A free sample kit with one 300 × 300 mm sample per finish, including finish swatches, is dispatched within 3 business days; you pay the shipping cost.
05 — Where it goes

The applications for BAMOSB decking.

06 — Common questions

What buyers ask before they specify.

What sizes and finishes does the bamboo decking come in?

20 / 25 mm as standard on 1,220 x 2,440 mm sheets, with eight factory finishes, so a project can be supplied from one production batch with several tones on the same deck. The board is thermally modified at 200 C, which is what takes it to EN 350 Class 1 durability and keeps it stable outdoors without a tropical hardwood species.

How long does BAMOSB decking last outdoors?

The board is classified EN 350 Class 1 — the durability class EN 350 assigns to material intended for outdoor use above ground. The classification is issued on the batch durability test report, which we supply with the shipping documents.

How does it compare to tropical hardwood on price?

Per m² installed, BAMOSB decking sits in the same band as comparable tropical hardwood decking. The differences that matter commercially are lead time, consistent grading between batches, and no exposure to tropical hardwood price and deforestation questions. We quote per container, so send us your board layout and volume.

Does it need to be re-oiled?

For colour stability — preventing the natural silvering that affects every wood species under UV — we recommend re-oiling annually. Re-oiling frequency has no effect on structural performance; it is a purely cosmetic maintenance step.

What about slip resistance?

Slip resistance depends on the profile, not the material. We supply both smooth and brushed boards; the brushed profile is the one to specify for pool surrounds and high-moisture areas, and the slip resistance class for the finish you need is stated on the batch test report.

07 — Installation & fixing

How to install BAMOSB decking.

Outdoor fixing is where most decking failures start. These are the details that decide whether the board lasts.

01
Fix to a ventilated substructure
Deck boards need an air gap under them. Lay boards on battens or a ventilated pedestal system with a minimum 40 mm clear void.
02
Use the specified fastener and spacing
316 stainless or hot-dip galvanised fasteners, 6 mm minimum from the board edge, with spacing set by the load and the span between supports.
03
Set the gap you can live with
6–8 mm between boards. The board moves with humidity and the gap is what lets it.
04
Cut ends and seal them
Cut boards square and seal the end grain. Unsealed end grain is where water enters first.
05
Plan the oil schedule
Re-oil annually, or schedule it into your maintenance cycle. Colour will silver between coats without affecting the board structurally.
08 — Delivery, packing & documents

What happens after you order.

We quote EXW, FOB, CIF, CFR, DAP and DDP; physical shipments are made on FOB Ningbo, CIF or DAP terms.

Property
Value
Minimum order
One 40' HQ container (≈ 1,200 m² depending on board profile). Mixed widths can be consolidated into a single container.
Lead time
21 days from purchase order to FOB Ningbo for the 8 standard finishes; 28–35 days for custom finishes, textures and CNC patterns.
Packing
Bundled and banded with PE film and edge protection; ≈ 1,200 m² per 40' HQ container depending on board profile.
Documents
Bill of lading, commercial invoice, packing list, certificate of origin, EN 350 durability test report and FSC C162198 chain-of-custody certificate on request.
Samples
A free sample kit with one 300 × 300 mm sample per finish, including finish swatches, is dispatched within 3 business days; you pay the shipping cost.
Get a quote

Specify BAMOSB decking for your next project.

Phone+86-187-5886-0466
BAMOSB Outdoor Decking · EN 350 Class 1 · FOB Ningbo Updated November 2026

Engineering data

Values below are the measured, third-party laboratory results for this product. Test basis: MOR and MOE per EN 310, thickness swell and internal bond per EN 317, formaldehyde emission per EN 717-1. Batch-level results ship on every spec sheet. Items marked “target” are development goals under independent re-test, not current product values.

Grade / standard EN 350 Class 1   · EN 350 Class 1 · Use class 3 (above ground)
Thickness 20 × 140 × 2,440 mm
Standard size 140 × 2,440 mm   · Custom cuts available
Density 1,150 kg/m³
Bending strength (MOR) ≥ 110 MPa (measured, third-party lab)   · Target ≥ 110 MPa (measured)
Modulus of elasticity (MOE) ≥ 14,000 MPa (measured, third-party lab)
Thickness swelling, 24 h immersion ≤ 15% (EN 317)
Formaldehyde emission E0 (measured) · 0 ppm added UF (phenolic resin)
Minimum order quantity 1 × 40' HQ (≈ 1,200 m²)
Lead time 21 days to FOB Ningbo

Source: BAMOSB internal QC plus third-party laboratory testing. Per-lot spec sheets are issued with every shipment.

Request a quote
-->